 |
With guide / Twin rod (With guide) |
 |
 |
Mini Guide Slider MGA Series |
|
 |
·Precision and functions are packed into its compact size. ·11 variations (standard; for clean rooom; with buffer; with end keep; with shock absobar; stroke adjustable; etc) ·Cylinder bore 4.5-20mm. RoHS compliant product |
 |
|
 |
|
|
 |
|
 |
·Linear guide to ensure accuracy during stroke movement.
·Choice of three mounting surfaces for workpieces reduces design limitations.
·Achieves ultimate in compact and thin profile.
|
 |
|
 |
|
|
 |
|
 |
·The work table includes a twin rod cylinder and two guides to achieve high
accuracy; high rigidity; and large output.In addition; the center stopper structure prevents the table from slanting to assure stable accuracy. Dowel pin holes for mounting location give easy and sure installation and removal.
Cylinder bore: 6mm; 10mm; 16mm; 20mm; 25mm
Stroke: 10-80mm
Repeating position accuracy: +/-0.05mm
Maximum load: 4.9N (6mm); 29.4N (10mm); 39.2N (16mm); 58.8N (20mm); 78.5N (25mm)
|
 |
|
 |
|
|
 |
Jig Cylinder with Guides SGDA Series |
|
 |
·Most suitable for stoppers and lifters on conveyor line. ·Two types of guide rod bearings; slide bearings and ball bearings are available depending on applications. ·Four types of installation are possible in accordance to the installation environment; and piping location can also be selected in two different directions. |
 |
|
 |
|
|
 |
|
 |
·Thin type actuator equipped with linear guides.
·Twin rods achieve high cylinder thrust.
·With buffer spring; with end keep mechanism and symmetric cylinder are available. |
 |
|
 |
|
|
 |
|
 |
·The AX Cylinder has a configuration where a high-precision ball spline is directly driven according to the change from cylinder-oriented to guide-oriented conceptions. This configuration is compact and makes the best use of a high-precision ball spline. Cylinder bore size: 10mm-30mm Stroke: 20-200mm |
 |
|
 |
|
|
 |
|
 |
·The AP Unit is a integral type of the highly evaluated AP Table (linear guide with built-in cylinder) with a tooling table. The Unit has the same characteristics of the AP Table with larger stroke range up to 60mm and the ability to mount workpieces on the front. Cylinder bore size: 10mm; 12mm Stroke: 15-60mm Parallelism during stroke: 0.004-0.006mm Maximum loading mass: 1.6-2.0kg |
 |
|
 |
|
|
 |
Cylinder with Guide GA Series |
|
 |
·Slim cylinder and highly accurate guide rod (non-rotating accuracy +/-0.025angle) are combined into a compact unit. ·Bearings give high accuracy; long life; high speed operation and are standard equipment. ·Installation is possible on the top; bottom or side surfaces. |
 |
|
 |
|
|
 |