Slider type (Table type) < DIGITAL CATALOG Ver.5.0

	Actuator
	TOP > Actuator > Category List > Slider type (Table type)

Actuator


	Standard cylinder

	With guide / Twin rod

	Slider type

	Air hand / Handling module

	Swing type

	Low speed type

	Actuator auxiliary

Valve

Compressor / Air filter / Regulator

Speed controller / Fitting / Others

Vacuum pump / Vacuum equipment / Vacuum pad

Clean system equipment

Electric actuator

ECO Equipment

Static electricity removing unit

Fluororesin equipment

Constant delivery pump

Slider type (Table type)

AP Table APT Series

·The AP Table is a compact/ high-precision actuator that maintains linear guide precision and rigidity; and incorporates an air cylinder into the linear guide while achieving compactness.
Cylinder bore size: 6mm-16mm
Stroke: 5-30mm
Parallelism during stroke: 0.003-0.005mm
Maximum loading mass: 0.3-4.0kg

Slide Unit SUT Series

·Two cylinders combined into a single table achieves high non-rotating and positioning accuracy.
·Provides twice the thrust while saving space; and a high-performance actuator that greatly reduces design man-hours and costs.

GT Slide Table Series B Type

·Compact actuator is a unit type that provides a combination of a compact body with a cylinder and miniature guide to achieve high accuracy and high rigidity as the Z axis. It is the industry's first compact slide table that uses an endless type miniature guide. The space-saving design makes one-sided piping possible.
Stroke: 15-120mm
Repeating position accuracy: +/-0.025mm
Maximum loading mass: 3kg (10mm); 4kg (16mm); 5kg (25mm) (Type B)

GT Slide Table Series C Type

MT Slide Table AMT Series

·A magnetic rodless cylinder with high retaining capability and a linear guide are installed within a slim body. Stopping accuracy has been further improved; and an adjusting type shock absorber for reducing shocks and noise is standard equipment. The piping connection port and the sensor switch wiring outlet are concentrated in the same direction for corresponding to space-saving design.
Cylinder bore: 10mm; 16mm; 25mm
Stroke: 200-1200mm
Repeating position accuracy +/-0.05mm
Maximum loading mass: 5kg (10mm); 10kg (16mm); 25kg (25mm)

RT Slide Table Series B Type

·A proven and reliable slit-type rodless cylinder that achieves high-speed operation and a long stroke and a linear guide are installed within a slim body.
Stopping position accuracy has been improved; assuring powerful and straight motion in response to large loads and bending moment.
Cylinder bore: 16mm; 25mm
Stroke: 200-1200mm
Repeating position accuracy: +/-0.05mm
Maximum loading mass: 20kg (16mm); 30kg (25mm)

WT Slide Table AWT Series

·Uses a wide linear guide to achieve stable movement and high rigidity. Also uses a high-performance actuator for wide stroke adjustment. The slim design with its low table position mounts an fixed absorption shock absorber that improves stroke-end stopping position accuracy and reduces shock and noise; an embedded sensor switch; and other necessary functions.
Cylinder bore: 16mm; 20mm
Stroke: 50?200mm
Repeating position accuracy: +/-0.05mm
Maximum loading mass: 15.3kg (16mm); 20kg (20mm)

WS Slide Table AWS Series

·Slide table equipped with twin rod cylinders and two guides achieves high precision; high rigidity;
and high output. Also mounts necessary functions such as improved stop positioning accuracy at the end of stroke; fixed absorption type shock absorbers to reduce shocks and noise; and an embedded sensor switch.
Cylinder bore: 6mm; 10mm; 16mm; 20mm; 25mm
Stroke: 25-50mm(6mm); 50-100mm(10mm);
50-150mm(16mm-25mm)
Maximum payload: 5N(6mm); 30N(10mm); 40N(16mm); 60N(20mm); 80N(25mm)
Maximum payload (with shock absorber):
15N(6mm); 50N(10mm); 80N(16mm); 120N(20mm); 200N(25mm)

YZ Module ACY / ACZ Series

·This module easily improves Y-; Z-axis systems; for higher rigidity and versatile functions;
and uses two linear guide mechanisms on each axis to respond to heavy loads and high accuracy. In addition; new technologies include a newly developed midpoint stopper unit mounting; a double-acting cylinder; and a compact; built-in sensor switch.
Y-axis module (ACY)
Cylinder bore16mm; 25mm
Strokes200-600mm
Repeating position accuracy+/-0.02mm
Maximum loading mass20kg (16mm); 40kg (25mm)
Z-axis module(ACZ)
Cylinder bore20mm; 25mm
Strokes50?200mm
Repeat positioning accuracy}0.02mm
Maximum loading mass6kg (20mm); 10kg (25mm)